2-8
Rack-mounting procedure at a glance
Figure2-5 Rack-mounting procedure
NOTE:
If a rack shelf is available, you can put the switch on the rack shelf, slide the switch to an appropriate
location, and attach the switch to the rack with the mounting brackets.
Chassis dimensions and rack requirements
Figure2-6 Chassis dimensions with the mounting brackets installed at the port side
(1) Power supply handle
(2) Mounting bracket
Figure2-7 Chassis dimensions with the mounting brackets installed at the power supply side
(1) Power supply handle
(2) Mounting bracket
Follow these guidelines when you install the switch in a 19-inch rack:
•
The distance between the front and rear posts of the rack must meet the requirements
described in
•
To secure the switch to the rack, you must install not only mounting brackets, but also chassis
rails and slide rails.
Select an installation
position for the mounting
brackets (near the power
supply side or port side)
Attach the
mounting
brackets to the
switch
Attach the
chassis rails to
the switch
Connect the
grounding cable to a
grounding point
Attach the slide
rails to the rack
Mount the switch
in the rack