2-11
•
RT-MSR810-W
•
RT-MSR810-W-LM
•
RT-MSR810-LM-HK
•
RT-MSR810-W-LM-HK
•
RT-MSR810-LM-GL
•
RT-MSR810-W-LM-GL
•
RT-MSR810-CNDE-SJK
To install a Micro SD card:
1.
Use a PH2 screwdriver to remove the M3 × 4 mm (0.16 in) countersunk screw on the Micro
SD card slot cover and then take off the cover.
2.
Insert the Micro SD card into the Micro SD card slot along the guide rails.
3.
Reinstall the cover and use a PH2 screwdriver to fasten the screw on the cover.
Figure2-12 Installing a Micro SD card
Installing an SD card
CAUTION:
•
To avoid damaging the SD card slot, do not use excessive force when you install an SD card.
•
The router cannot read data from or write data into a SD card if the SD card is in write
protection state.
•
The screw on the SD card slot cover is M3 × 4 mm (0.16 in) countersunk screw. Use a PH2
screwdriver to loosen and fasten the screw on the cover. A mismatched screwdriver might
damage the screw.
Only the RT-MSR810-10-PoE router supports SD cards.
To install an SD card:
1.
Use a PH2 screwdriver to remove the M3 × 4 mm (0.16 in) countersunk screw on the SD card
slot cover and then take off the cover.
2.
Insert the SD card into the SD card slot along the guide rails.
3.
Reinstall the cover and use a PH2 screwdriver to fasten the screw on the cover.
1
3
2
