H3C MSR810, Справочник по командам

Страница: 97 / 389

85
• Limit on a card. (Distributed devices in standalone.)
• Limit on a device. (Centralized devices in standalone mode.)
New maximum number settings only apply to subsequently established PPPoE sessions.
Examples
# (Centralized devices in standalone mode.) Set the maximum number of PPPoE sessions on a
device to 3000.
<Sysname> system-view
[Sysname] pppoe-server session-limit total 3000
# (Distributed devices in standalone mode.) Set the maximum number of PPPoE sessions on card 3
to 1500.
<Sysname> system-view
[Sysname] pppoe-server session-limit slot 3 total 1500
Related commands
pppoe-server session-limit
pppoe-server session-limit per-mac
pppoe-server session-limit per-vlan
pppoe-server tag ac-name
Use
pppoe-server tag ac-name
to set the access concentrator (AC) name for the PPPoE server on
an interface.
Use
undo pppoe-server tag ac-name
to restore the default.
Syntax
pppoe-server tag ac-name name
undo pppoe-server tag ac-name
Default
The AC name for the PPPoE server is the device name on an interface.
Views
Layer 3 Ethernet interface/subinterface view
Layer 3 virtual Ethernet interface/subinterface view
VLAN interface view
Layer 3 aggregate interface/subinterface view
VE-L3VPN interface/subinterface view
EFM interface/subinterface view
Predefined user roles
network-admin
Parameters
name
: Specifies an AC name, a case-sensitive string of 1 to 64 characters.
Usage guidelines
The PPPoE server sends its AC name in PADO packets. PPPoE clients choose a PPPoE server by
AC name. The PPPoE clients on H3C devices cannot identify PPPoE servers by AC name.
The device does not support an AC name comprised of all blank spaces.