H3C MSR810, Справочник по командам

Страница: 130 / 389

118
[Sysname] interface virtual-ppp 1
[Sysname-Virtual-PPP1] ppp lcp sn string sn1
Related commands
ppp lcp sn accept
ppp lcp sn request
ppp user accept-format imsi-sn split
Use
ppp user accept-format imsi-sn split
to configure the separator for the received
authentication information.
Use
undo ppp user accept-format
to restore the default.
Syntax
ppp user accept-format imsi-sn split splitchart
undo ppp user accept-format
Default
No separator is configured for the received authentication information.
Views
VT interface view
Predefined user roles
network-admin
Parameters
splitchart
: Specifies the separator. The separator contains one character, and it can be a letter, digit,
or sign such as the percent sign (%), pound sign (#), and at sign (@).
Usage guidelines
By default, the authentication information contains only the client username. If you include the IMSI
or SN information in the authentication information, you must configure the separator to separate
different types of information. For example, if you specify the at sign (@) as the separator, the
information
imsiinfo@sninfo@username
will be split into
imsiinfo
,
sninfo
, and
username
.
If no IMSI/SN information is received from the peer during the authentication process,
the IMSI/SN
information split from the received authentication information is used.
Examples
# Configure the pound sign (#) as the separator for the authentication information.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] ppp user accept-format imsi-sn split #
Related commands
ppp user attach-format imsi-sn split
ppp user replace
ppp user attach-format imsi-sn split
Use
ppp user attach-format imsi-sn split
to configure the separator for the sent authentication
information.