H3C MSR2600-6-X1, Руководство по установке

Страница: 16 / 43

9
Mounting the gateway on a workbench
IMPORTANT:
•
Make sure the workbench is clean, stable, and reliably grounded.
•
Maintain a minimum clearance of 100 mm (3.94 in) around the gateway for heat dissipation.
•
Do not place heavy objects on the gateway.
To mount the gateway on a workbench:
1.
Place the gateway upside down on the workbench and attach the rubber feet to the four
round holes in the chassis bottom.
2.
Place the gateway upside up on the workbench. Make sure the rubber feet stand securely on
the workbench.
Figure 5 Mounting the gateway on a workbench