13
4.
Attach the other end of the grounding cable to the grounding strip.
Figure 11 Connecting the grounding cable to the router
Installing a SIC
CAUTION:
SIC interface modules are not hot swappable. Make sure the router is powered off before installing
a SIC.
To install a SIC:
1.
Use a Phillips screwdriver to remove the fastening screws on the filler panel and remove the
filler panel.
2.
Push the SIC slowly into the slot along the guide rails until it makes close contact with the
backplane of the router.
3.
Fasten the captive screws on the SIC.
Figure 12 Installing a SIC
