3
Switching module probe commands
bcm
Use
bcm
to execute probe commands for a Broadcom chip.
Syntax
bcm
chassis-num
slot-num/subslot-num chip-num string
Views
Probe view
Predefined user roles
network-admin
network-operator
Parameters
chassis-num
: Specifies a chassis by its number, which is always 0.
slot-num
: Specifies a slot by its number in the range of 0 to 255.
subslot-num
: Specifies a subslot by its number in the range of 0 to 255.
chip-num
: Specifies a chip by its number in the range of 0 to 31.
string
: Specifies probe commands for the Broadcom chip. Use slashes (/) to separate commands.
Usage guidelines
Use this command to execute the specified probe commands for the specified switching chip. If you
specify two or more commands for the
string
argument, separate the commands with slashes.
debugging physical lsw
Use
debugging physical lsw
to enable debugging for the specified submodule or all submodules of the
switching module.
Use
undo debugging physical lsw
to disable submodule debugging.
Syntax
debugging physical lsw
{
all | acl | ioctl | mac | mc | ni | port | proto | psec | qos | sys | vlan
}
{
all
| error | event | timer
}
undo debugging physical lsw
{
all | acl | ioctl | mac | mc | ni | port | proto | psec | qos | sys | vlan
}
{
all | error | event | timer
}
Default
Submodule debugging is disabled.
Views
Probe view
