22
(}), left parenthesis ((), right parenthesis ()), left bracket ([), right bracket (]), left angle bracket (<),
right angle bracket (>), hyphen (-), underscore(_), plus sign (+), equal sign (=), vertical bar (|), back
slash (\), colon (:), semi-colon (;) quotation marks ("), apostrophe ('), comma (,), dot (.), and slash (/),
spaces, and other Unicode characters and symbols.
Usage guidelines
When 802.1X or MAC address authentication is configured on a router, you can use a RADIUS
server to issue VLAN configuration to ports that have passed the authentication. Some servers can
send IDs or names of the issued VLANs to the router.
Use VLAN names, rather than VLAN IDs, to distinguish a large number of VLANs.
Examples
# Configure the name of VLAN 2 as
Test VLAN
.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] name Test VLAN
Related commands
display vlan
reset counters interface vlan-interface
Use
reset counters interface vlan-interface
to clear the statistics on a VLAN-interface.
Syntax
reset counters interface
vlan-interface
[
vlan-interface-id
]
Views
User view
Default command level
2: System level
Parameters
vlan-interface-id
: Specifies a VLAN-interface number.
Usage guidelines
Before collecting the traffic statistics within a specific period of time on an interface, clear the existing
statistics first.
If the
vlan-interface-id
argument is not specified, this command clears the statistics of all
VLAN-interfaces.
If the
vlan-interface-id
argument is specified, this command clears the statistics of the specified
VLAN-interface.
Examples
# Clear the statistics on VLAN-interface 2.
<Sysname> reset counters interface vlan-interface 2
Related commands
display interface vlan-interface
shutdown
Use
shutdown
to manually shut down a VLAN-interface.