138
Admin status : Tx_Rx
Trap flag : No
Polling interval : 0s
Number of neighbors : 5
Number of MED neighbors : 2
Number of sent optional TLV : 12
Number of received unknown TLV : 5
Table 31 Command output
Field Description
Global status of LLDP
Indicates whether LLDP is globally enabled.
LLDP neighbor information last
changed time
Time when the neighbor information was last updated.
Transmit interval
LLDPDU transmit interval.
Hold multiplier
TTL multiplier.
Reinit delay
LLDP re-initialization delay.
Transmit delay
LLDPDU transmit delay.
Trap interval
Trap transmit interval.
Fast start times
Number of the LLDPDUs sent each time fast LLDPDU transmission is
triggered.
Port 1
LLDP status of port 1.
Port status of LLDP
Indicates whether LLDP is enabled on the port.
Admin status
LLDP mode of the port:
•
TxRx
—The port can send and receive LLDPDUs.
•
Rx_Only
—The port can only receive LLDPDUs.
•
Tx_Only
—The port can only send LLDPDUs.
•
Disable
—The port cannot send or receive LLDPDUs.
Trap Flag
Indicates whether trapping is enabled.
Polling interval
LLDP polling interval, which is 0 when LLDP polling is disabled.
Number of neighbors
Number of LLDP neighbors connecting to the port.
Number of MED neighbors
Number of MED neighbors connecting to the port.
Number of sent optional TLV
Number of optional TLVs contained in an LLDPDU sent through the
port.
Number of received unknown TLV
Number of unknown TLVs contained in all received LLDPDUs.
display lldp tlv-config
Use
display lldp tlv-config
to display the types of advertisable optional LLDP TLVs of a port.
Syntax
display lldp tlv-config
[
interface interface-type interface-number
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
