4
Predefined user roles
network-admin
network-operator
Parameters
all
: Specifies all submodules of the switching module.
acl
: Specifies the ACL submodule of the switching module.
ioctl
: Specifies the ioctl submodule of the switching module.
mac
: Specifies the MAC submodule of the switching module.
mc
: Specifies the multicast submodule of the switching module.
ni
: Specifies the NI submodule of the switching module.
port
: Specifies the port submodule of the switching module.
proto
: Specifies the protocol submodule of the switching module.
psec
: Specifies the port security submodule of the switching module.
qos
: Specifies the QoS submodule of the switching module.
sys
: Specifies the system submodule of the switching module.
vlan
: Specifies the VLAN submodule of the switching module.
all
: Specifies all types of debugging.
error
: Specifies error debugging.
event
: Specifies event debugging.
timer
: Specifies timer debugging.
Usage guidelines
Outputting the debugging information affects system operation efficiency. When you diagnose a
network fault, use this command to enable debugging for the specified submodule of the switching
module, rather than multiple submodules.
Related commands
display system internal dump lsw debugging
display hardware internal physical lsw
Use
display hardware internal physical lsw
to display internal information for the switching module.
Syntax
display hardware internal physical lsw
{
acltable | boardinfo | chipnoinfo | globalinfo | debugging |
isolationinfo | mactable | multicasttable | qosinfo | stpinfo
} [
subslot
]
Views
Probe view
Predefined user roles
network-admin
network-operator
