50
Syntax
ovsdb server tcp ip
ip-address
port
port-number
undo ovsdb server tcp
ip
ip-address
port
port-number
Default
The device does not have active OVSDB TCP connections.
Views
System view
Predefined user roles
network-admin
Parameters
ip
ip-address
: Specifies the destination IP address for the TCP connection.
port port-number
: Specifies the destination port for the TCP connection. The value range for
the
port-number
argument is 1 to 65535.
Usage guidelines
The device can have a maximum of eight active OVSDB TCP connections.
To establish the connection, you must execute the
ovsdb server enable
command. You must
disable and then re-enable the OVSDB server if it has been enabled.
Examples
# Set up an active OVSDB TCP connection to port 6632 at 192.168.12.2.
<Sysname> system-view
[Sysname] ovsdb server tcp ip 192.168.12.2 port 6632
Related commands
ovsdb server enable
ovsdb server ptcp
vtep access port
Use
vtep access port
to specify a site-facing interface as a VTEP access port.
Use
undo vtep access port
to restore the default.
Syntax
vtep access port
undo vtep access port
Default
An interface is not a VTEP access port.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin