8
Figure 3
Installing the card
Removing the card
CAUTION:
•
Before you remove the card, remove the cable from it.
•
If you are not to install a new card after removing the original one,
install the filler panel in the slot to prevent dust and ensure good
ventilation in the device.
To remove the card:
1.
Prepare an anti-static bag.
2.
Use the Phillips screwdriver to loosen the captive screw on the card,
as shown by callout 1 in
,
3.
Rotate outward the ejector lever as shown by callout 2 in
.
4.
Pull the card slowly out of the slot as shown by callout 3 in
.
5.
Place the removed card in the anti-static bag.
