174
LeaveAll message
Each MRP participant starts its LeaveAll timer when starting up. When the timer expires, the MRP
participant sends LeaveAll messages to the peer participant.
Upon sending or receiving a LeaveAll message, the local participant starts the Leave timer. The local
participant determines whether to send a Join message depending on its attribute status. A
participant can re-register the attributes in the received Join message before the Leave timer
expires.
When the Leave timer expires, a participant deregisters all attributes that have not been
re-registered to periodically clear useless attributes in the network.
MRP timers
MRP uses the following timers to control message transmission.
Periodic timer
The Periodic timer controls the transmission of MRP messages. An MRP participant starts its own
Periodic timer upon startup, and stores MRP messages to be sent before the Periodic timer expires.
When the Periodic timer expires, MRP sends stored MRP messages in as few MRP frames as
possible and restarts the Periodic timer. This mechanism reduces the number of MRP frames sent.
You can enable or disable the Periodic timer. When the Periodic timer is disabled, MRP does not
periodically send MRP messages. Instead, an MRP participant sends MRP messages when the
LeaveAll timer expires or the participant receives a LeaveAll message from the peer participant.
Join timer
The Join timer controls the transmission of Join messages. An MRP participant starts the Join timer
after sending a Join message to the peer participant. Before the Join timer expires, the participant
does not resend the Join message when the following conditions exist:
•
The participant receives a JoinIn message from the peer participant.
•
The received JoinIn message has the same attributes as the sent Join message.
When both the Join timer and the Periodic timer expire, the participant resends the Join message.
Leave timer
The Leave timer controls the deregistration of attributes.
An MRP participant starts the Leave timer in one of the following conditions:
•
The participant receives a Leave message from its peer participant.
•
The participant receives or sends a LeaveAll message.
The MRP participant does not deregister the attributes in the Leave or LeaveAll message if the
following conditions exist:
•
The participant receives a Join message before the Leave timer expires.
•
The Join message includes the attributes that have been encapsulated in the Leave or LeaveAll
message.
If the participant does not receive a Join message for these attributes before the Leave timer expires,
MRP deregisters the attributes.
LeaveAll timer
After startup, an MRP participant starts its own LeaveAll timer. When the LeaveAll timer expires, the
MRP participant sends out a LeaveAll message and restarts the LeaveAll timer.
Upon receiving the LeaveAll message, other participants restart their LeaveAll timer. The value of
the LeaveAll timer is randomly selected between the LeaveAll timer and 1.5 times the LeaveAll timer.
This mechanism provides the following benefits:
Содержание H3C S7500E-X
Страница 70: ...57 ...
