H3C CR19000-8, Руководство по установке

Страница: 9 / 115

1-3
Symbol Description
Place the device with the arrows up.
The device is fragile. Handle it with care.
Keep the device from humidity, rains, and wet floor.
Examining the installation site
The router must be used indoors. To ensure correct operation and long service life of your router,
make sure the installation site meets the following requirements.
Weight support
Make sure the floor or ground at the installation site can support the combined weight of the router
and the rack. The total weight of the router includes the chassis and its components (for example,
modules, fan trays, power supplies, and cables) and accessories. For the weights of the router and
its components, see "Weights and dimensions."
To mount the switch in a rack, select slide rails that can support the total weight of the router.
To assess the load-bearing requirements for the floor and slide rails, take potential system expansion
(for example, adding more modules) also in consideration.
Space
IMPORTANT:
•
The rack must have a front door (single door as a best practice) and a rear door.
•
For easy installation and maintenance, reserve a minimum clearance of 1200 mm (47.24 in)
between the rack and walls or other devices.
Table1-2 Router dimensions and rack requirements
Model Chassis dimensions Rack requirements
CR19000-8
•
Height —843 mm (33.19 in)/19 RU
•
Width —440 mm (17.32 in)
•
Depth —745 mm (29.33 in)

650 mm (25.59 in) for the chassis

95 mm (3.74 in) from the
rack-mounting surface of the
mounting bracket to the cable
management bracket front end
•
A minimum of 1000 m (39.37 in) in depth
(recommended).
•
You can also use a rack with a depth of
800 mm (31.50 in) (with the door thickness
not exceeding 25 mm (0.98 in).
•
A minimum of 100 mm (3.94 in) between
the front rack posts and the front door.
•
A minimum of 650 mm (25.59 in) between
the front rack posts and the rear door.