5
NOTE:
(Optional) In the window that appears, toggle on Save Configuration File. Select the slot that
accommodates the switch module, so that the system saves the current configuration
information of the switch module in the selected slot.
Configuring the management IP address through the CLI of
the OM module
Prerequisites
Before configuring the management IP address of the switch module through the CLI of the OM
module, ensure that the following work is completed:
•
The switch module has been powered on. For details, see "Powering on the switch module."
•
You have logged in to the CLI of the OM module. For details, see "Logging in to the CLI of the
OM module."
Configuration procedure
On the OM CLI, run the
auto-ipv4
command to configure the management IP address of the switch
module in slot 1. When configuring the management IP address of the switch module, you can
determine whether to save the configuration in the profile. The configuration methods include:
•
Configure the management IP address and save the configuration in the profile:
<OM>auto-ipv4 address 192.168.200.1 mask 255.255.255.0 gateway 192.168.200.254 io 1
save enable
•
Configure the management IP address but do not save the configuration in the profile:
<OM>auto-ipv4 address 192.168.200.1 mask 255.255.255.0 gateway 192.168.200.254 io 1
save disable
Configuring the management IP address through the CLI of
the switch module
Prerequisites
Before configuring the management IP address of the switch module through the CLI of the switch
module, ensure that the following work is completed:
•
The switch module has been powered on. For details, see "Powering on the switch module."
•
You have logged in to the switch module. For details, see "Logging in to the switch module."
Configuration procedure
For specific operation procedures, see the
H3C UniServer BX720E Switch Module Configuration
Command Manual
.
Configuring services of the switch module
Prerequisites
•
The switch module has been powered on. For details, see "Powering on the switch module."
•
You have logged in to the switch module. For details, see "Logging in to the switch module."
•
You have planned functions required by services of the switch module according to actual
requirements.
