11
Connect the A/C power to Falcon 5208
Check LCD for system readiness
For cabling details, please see the Cabling Guide section.
A host bus adapter card (HBA) is required to be installed on your host machine(s).
The actual position of HBA may look different on your host machine(s).
Falcon 5208 will start booting up upon power cords are plugged. No further action is required
for this step.
You may have 1 or 2 PSUs depending on your purchase. Connect
ALL
PSUs to the A/C power.
When the system is ready, the LCD will display the model name and the IP address.
E.g.,
“Falcon 5208”
10.0.24.52
Now you are ready to power on your host machine(s)
