TS 125
23
6. LEDS AND BUTTONS
LEDs
1. LED “Heizen” is on: The function heating is active
2. LED “Kühlen” is on: The function cooling is active
3. LED “Relais” is on: The relay is switched on.
The signal “Heizen” for heating or “Kühlen” for cooling depends on the
temperature thresholds you have set and is done automatically.
BUTTONS
1. button
5
: increase your desired setting
2. button
6
:
decrease your desired setting
3. button
“SET”
: change settings
7. MENU
When pressing the button
“SET“
the device will enter edit mode showing the
following menu steps:
MENU STEP N1
E 23
Identified by the symbol shown in first position, the
“E”
. Here you can select
the temperature at which an external device should be switched ON. The value
can be selected with the buttons
56
. The selection is confirmed by pressing
“SET”
and the display will switch to the next step.
MENU STEP N2
A 21
Identified by the
“A”
. Here you can select the temperature at which an ex-
ternal device should be switched OFF. The value can be selected with the
buttons
56
. The selection is confirmed by pressing
“SET
” and the display
will switch to the next step.
