H-Tronic 1 11 46 20, Руководство пользователя, Страница: 15 / 24

Water Level Switch WPS 3000plus |
15
LEDS:
1. LED “ SENSOR MIN ” ON:
The liquid has reached the level of Sensor “ MIN ;”
2. LED “ SENSOR MAX ” ON:
The liquid has reached the level of Sensor “ MAX ;”
3. LED “ FEHLER ” (ERROR) ON:
The precondition is a water contact of the water sensors! For example,
the water sensors are reversed and the water sensor 1
“ sensor MIN ” is
interrupted or not connected.
4. LED “ REL. EIN ” ON:
The relay is switched “ ON ”
MODE-SWITCH:
1. POSITION “ NACHFÜLLEN ” (refill):
The device has been configured into refill mode.
2. POSITION “ ENTLEEREN ” (empty):
The device has been configured to empty/discharge liquid level/tank
The device can be configured to either refill a tank of liquid or to discharge/
empty the liquid level. The two drawings on page 21 show the operating princi-
ple of the WPS 3000plus.
TECHNICAL DATA
– Power supply: 230 V/50 – 60 Hz
– Power consumption: max. 1,5 W
– Switching power: max. 3000 W
– Sensitivity: < 50 kOhm
– Class: IP 20
– Sensor connection: RJ 45 socket
– LED indicators : Power, Sensor Min,
Sensor Max, Error und Rel. On
– Package contents: 2 water sensors each
with 10 m cable and RJ 45 plug