Vroom24 Cabinet Installation
1.
Locate cardboard
template inside
the cabinet.
2.
Place mounting
bracket in
template.
Secure with 5
screws as
shown.
3.
Remove the
cardboard
Template.
4.
Install the side
panels. Flex them
so the edges tuck
under the 6 plastic
molded tabs.
5.
Attach accessory
brackets as
shown.
6.
Install the Vroom
in the mounting
bracket by
pushing it into
place as shown.
It will snap in
place when
installed correctly.
7.
Connect the
vacuum tubing to
the Vroom’s
connector on the
back as shown.
Do NOT glue,
press fit only.
8.
Connect the low
voltage wires on
the back of the
unit.
If you require additional information on installation, please visit: www.VroomYourRoom.com
H-P Products, Inc. 512 W. Gorgas Street, Louisville, OH 44641
06-11 IH-109
