gaitway-3D Service manual
Ref.:TM-MAN-0005-ARS
Iss.: A
Rev.: 9
Date: 07/12/2020
Page : 58
13. gaitway-3D sensors calibration checklist
Date:
Name:
Time:
Test Step
Measurements/Test Results
Seq.
No.
Description
Required/No
minal (incl.
tolerance)
Measured/
Calculated
Remarks/Calculations
Pass/
No
pass
1.
Test Readiness Review:
Check
implementation
of
safety
precautions
Identify item name, identification number
and serial number.
Device name, type:
Device s/n:
Instrumentation s/n:
2.
Place the weight scale included in the
calibration set on a flat surface near the
treadmill and turn power on.
3.
Connect the Calibration amplifier to the
mains plug with the power cord of the
calibration set.
4.
Connect the Calibration amplifier to the
router with the Ethernet cable of the
calibration set.
5.
Connect the calibration gauge to the
calibration amplifier.
6.
Connect the coaxial cable of the calibration
set between the treadmill force amplifier
Sync out connector and the calibration
amplifier Trig in connector.