Gymna Pulson 330, Руководство по обслуживанию

Страница: 10 / 49

8. Right side panel.
7. Output connector 1 (CON 1). Can be connected to a 1/3 Mhz. head.
8. Output connector 2 (CON 2). Can be connected to a 3/1 Mhz head.
9. Mains entrance.
The pulson 330 must be connected to a wall socket with a earth
contact.
Use only the original cable that is supplied with the apparatus in
the
accessories package.
Check whether the required supply voltage, mentioned on the serial
number plate,
corresponds with the available mains supply ratings.
10. Serial number plate.
On this plate the serial number, as well as the required supply
voltage and
frequency are mentioned.
Also the mains fuses ratings are mentioned.
11. Plug for combination therapy.
Via this plug, the pulson 330 can be linked with another GYMNA
apparatus
in order to perform combination therapy.
12. Power switch.
Will light up when the power is switched on.
13. Mains fuses. 2 Fuses of 1 A type L.
Page 10