background image

Thank you for purchasing the AG-09 Guitar Amplifier.

Read this manual thoroughly prior to using your amplifier in order to get the most out of the functions 
available. Ensure that this manual is also stored in a safe place.

PRECAUTIONS DURING USE

I)  Do not subject the amplifier to shocks by dropping, etc., or treat it roughly in any way.
2)  Place the amplifier carefully in a stable position. The sound from the amplifier will vary depending on how  
 

and where it is set up.

3)  Do not use or store the amplifier in locations where it is subject to direct sunlight or in environments that  
 

experience extreme temperatures and humidity levels.

4)  Reduce the volume to “O” or switch off the power supply when connecting the guitar shielded cable and   
 

the effects or other cables required for external connection. 

Note that the noise generated when plugs    

 

are inserted and removed may cause severe damage to the equipment.

5)  To avoid the danger of fire, do not place containers of liquid on the amp.
6)  As long as the amplifier is connected to an electrical outlet, it is not completely insulated from the power  
 

supply even if the power switch is turned off. When you are not using it, leave the power turned off. If you  

 

will not be using the amplifier for an extended period, leave the power cable disconnected.

AG-09

10-WATT AMPLIFIER

IMPORTANT SAFETY INSTRUCTIONS WARNING

1)  Read these instructions
2)  Keep these instructions.
3)  Heed all warnings.
4)  Follow all instructions.
5)  Do not use this apparatus near water.
6)  Clean only with a dry cloth.
7)  Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8)  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including  
 

amplifiers) that produce heat.

9)  Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two  

 

 

blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.  

 

The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your   

 

outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,    
 

and the point where they exit from the apparatus.

11)  Only use attachments/accessories specified by the manufacturer.
12)         Use only with the cart, stand, tripod, bracket, or table (I specified by the manufacturer, or sold with            
 

        the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to  

 

 

        avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been  

 

 

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects    

 

have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate  

 

 

normally, or has been dropped.

15) Minimum distances of 20cm around the apparatus for sufficient ventilations.
16) Do not install this equipment in a confined space such as a book case or similar unit. The ventilation  

 

 

should not be impeded by covering the ventilation openings with items such as news paper, table-cloths,   

 

curtains etc.

17) 

WARNING:

 The mains plug/appliance coupler is used as disconnect device, the disconnect device shall    

 

remain readily operable.

18) 

WARNING: 

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.    

 

The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as    

 

vases, shall not be placed on apparatus.

19)       Protective earthing terminal. The apparatus should be connected to a mains socket outlet with a  

 

 

protective earthing connection.

 

     "The Lightning Flash with arrowhead symbol within an equilateral triangle, is intended to alert the user  

 

     to the presence of uninsulated "dangerous voltage" within the product enclosure that may be of  

 

 

     sufficient magnitude to constitute a risk of shock to persons". 

 

     "The exclamationpoint within an equilateral triangle is intended to alert the user to the presence of  

 

 

     important operating and maintenance (servicing) instructions in the literature accompanying the  

 

 

     product".

Отзывы: