PEL-3211(H) User Manual
22
Using the Terminal Cover (PEL-011)
Description
The rear panel terminal cover should be used to
prevent electric shock. The rear panel terminal
covers should always be used when connecting a
load to the rear panel terminals.
Caution
Ensure the power is off before making any
connections to the booster pack.
Note
The PEL-013 (flexible terminal cover, see page 25) can
be used if the thickness of the load wiring becomes
too unwieldy for use with the PEL-012 terminal cover.
Note
In the following diagrams, the cable wiring is not
shown for clarity.
1.
Remove the screw holding the top cover to the
bottom cover.
1
2.
Line-up the bottom cover with the notches in
the output terminals.
3.
Place the top terminal cover over the bottom
cover.
