GETTING STARTED
21
Using the Rear Panel Input Terminals
Description
The rear panel input terminals accept up to M8-
sized crimped terminals. The rear terminals come
with a load input terminal cover for safety.
Steps
1.
Turn the power off from the rear panel.
2.
Turn the power off from the DUT.
3.
Connect the load wires to the input terminals:
Connect the positive (+) input terminal on the
load generator to the high potential output of
the DUT.
Connect the negative (-) input terminal to the
low potential output of the DUT.
+ potentional
- potential
Negative
terminal
Positive
terminal
