GW Instek PEL-3000 Series, Руководство пользователя

Страница: 120 / 257

PEL-3000(H) User Manual
118
Program
The PEL-3000(H) can create programs that are designed to step-
through up to 16 pre-set load operations. The program function is a
powerful tool that can allow you to perform a number of different
operations in succession.

The execution time of each step is user-defined.

Programs can be chained together to make larger programs.

Up to 16 programs can be created for a program chain.
See page 98 for saving load operations.
Program Overview
Description
When you run a program, you are essentially
executing up to 16 different load operations
consecutively. Each of the different load operations
are “steps” in the program. A program starts at
step 01 and ends at step 16.

A program recalls the operating mode, range,
static/dynamic mode, response speed and
other settings of each step from stored memory.
It also recalls the Go-NoGo settings.

The same memory settings can be used for
multiple steps.

The execution time of each step is configurable.

Applies the Go-NoGo settings for each step.

Each step must be executed in order.

Each step can be configured to automatically go
to the next step or wait for confirmation from
the user before proceeding to the next step.

Individual steps can be skipped.

Programs can be linked together to make
program chains.