GW Instek PEL-2000B Series, Руководство пользователя

Страница: 131 / 317

OPERATION
131
4. Repeat steps 1-3 for the
remaining parameters.
Note
The last Value (A Value or B Value) that is set
becomes the active setting. To swap between A Value
and B Value, use the A/B keys on the local load
module. This is not applicable to Group Unit mode.
For Group Unit mode, use the Switch Value
parameter to switch between A and B Value.
A/B Value and rising/falling SlewRate can be set for
both High and Low Range.
*Press Shift to toggle between coarse and fine
adjustment when editing the A Value and B Value
parameters. See page 188 for details.
Set to CR Mode
Background
The PEL-2000B series load operates in four
different modes, Constant Current (CC), Constant
Voltage (CV), Constant Resistance (CR) and
Constant Power (CP). Constant Resistance mode
will maintain a constant resistive load, using
variable current and voltage levels.
When a channel is active, the F1
key can be used to switch
between each operating mode.
F1 F5
~
F1
Mode
CC
Mode
CR
Mode
CV
Mode
CP
Panel Operation
1. Press the CHAN button and use
the selector knob to select a
channel.
CHAN
LOCAL
2. Press F1 until CR mode is
displayed in the display panel.
F1 F5
~
F1