GW Instek GSM-20H10, Руководство пользователя

Страница: 208 / 374

COMMAND SYNTAX
206
5. The data format (ASCII or binary) for calculation
results is selected using the :FORMat:DATA?
Command. The *RST and :SYSTem:PRESet default
is ASCII.
6. When brackets ([]) are left out of an expression, it
is assumed that it is referencing the first vector
point in the array (i.e., VOLT is the same as
VOLT[0]).
Example :CALCulate:MATH (volt * curr)
Command :CALCulate[1]:MATH?
Function
Query user-defined math expression.
Example :CALCulate:MATH?
Command :CALCulate[1]:STATe <b>
Function
This Command is used to enable or disable the CALC1
calculation.
When enabled, the selected math expression will be
performed when the GSM is triggered to perform the
programmed source-measure operations.
After the GSM returns to idle, you can read the result
of the selected math expression using
the :CALC1:DATA? Command.
When disabled, the :CALC1:DATA? Command will
return the NAN(not a number) value of +9.91e37.
<b> = 0 or OFF Disable CALC1 calculation
1 or ON Enable CALC1 calculation
Example :CALCulate:STATe 0
Command :CALCulate[1]:STATe?
Function
Query state (on or off) of CALC1.
Example :CALCulate:STATe?