GW Instek 4713008674147, Руководство пользователя, Страница: 75 / 221

OPERATION
75
Sequence Script File Format
Background
The sequence script files are saved in the *.csv
file format. When saving script file into internal
memory, each file is saved as tXXX.csv where
XXX is the file number from 001 to 010. When
saving script file into the USB disk, each file is
saved as S202_XXXX.csv where XXXX is the file
serial number from 0001 to 9999.
Sequence Script Settings
Background
This section mainly introduces the settings
within the Sequence page.
Run
It runs sequence script automatically. A script
can be saved in or loaded from the internal
memory or USB disk. Once the Run field is
turned On, return to the main display followed
by pressing Output key to initiate the set
sequence script.
Run On, Off
Total Step
It determines the total steps for a sequence script.
Each step can be edited from the Edit field.
Total Step 1 ~ 20000
Cycle Number
It sets how many cycles will be repeated. For
example, when a script consists of 6 steps and
cycle number is set 3, the sequence runs the script,
which contains step 1 ~ 6, for 3 times in a row.
Cycle Number
None No cycle will be repeated.