GVD M1184, Быстрый старт

Страница: 46 / 54

Mobile NVRs M1184 / M1284 Quick Start Guide 40
Auto-add a Camera
If you have imported cameras using the Installation Wizard as described in Use Initialization Wizard , you
can skip this section. Otherwise follow the guide below to add a camera to the system:
To "auto-add" a camera means to make the NVR scan for and add a camera without the camera's IP
address provided. Follow the guide below to "auto-add" a camera to the HD NVR :
1. Launch and log in to the HD NVR Manager as
described in Launch & Log in on page 30 .
2. From the mode buttons, click the gear button
to open the
Configuration Mode
.
Click.
3. In the Configuration Mode that opens, click
the Device tab from the Tree Panel . Then click
the plus sign button .
Click
Then click.
Tree Panel
A dialog box then opens and asks whether you
like to install a camera.
4. Click Auto Discovery .
Note Some cameras may not support Auto-
add . See the user’s manual to know how to
"manually-add" a camera.
An Auto Discovery window then opens.