GVD M1184, Быстрый старт

Страница: 13 / 54

Mobile NVRs M1184 / M1284 Quick Start Guide
7
Take a Tour
Rear-left View: M1184
COM1
DC-in
power
jack
COM2
SATA HDD/
SSD trays
Antenna
cutout
holes
PoE LAN
port
Title Description
DC-in power jack
3-pin power jack accepting wide-range DC power in from 8V to 35V, with ignition control.
Pinout:
Pin# Def. Description
1 V+
Positive polarity of DC power input
from 8V~35V.
2 GND Gound of DC-in power.
3 IGN Ignition signal input, e.g. the ACC
power of vehicles
1
Make sure the voltage of your DC-in power source is between 8V to 35V before tapping it.
Tapping p0ower source over 35V will damage the system.
The ignition input accepts the 12VDC ACC power of a car or 24VDC ACC power of a bus/
truck. Supplying power over 35V to ignition will damage the system.