19
Turning on the Appliance
Starting a wash cycle...
Draw out the lower and upper basket, load the dishes and
1. Push them back. It is recommended to load the lower basket first, then the upper one (see the section
entitled „Loading the Dishwasher“). Pour in the detergent (see the section entitled „Salt, Detergent and
Rinse Aid“).
2. Insert the plug into the socket. The power supply is 220-240V AC 50 Hz, the specification of the socket is
12 A 250 VAC.50 Hz.
Make sure that the water supply is turned on to full pressure. Close the door, press the ON/OFF button, rotate
the program selector to select a desired „Wash cycle“. (See the section entitled „Wash Cycle Table“.)
With a little force to ensure the door is properly closed.
NOTE:
A click could be heard when the door is closed perfectly.
When the washing is over, you can shut off the switch by pressing ON/OFF button.
Change the Programme
Premise: A cycle that is underway can only be modified if it has only been running for a short time. Otherwise,
the detergent may have already been released, and the appliance may have already drained the wash water.
If this is the case, the detergent dispenser must be refilled (see the section entitled „ Fill in the Detergent „ ).
Open the door, Press current prog. button more than three seconds to cancel the programme, then you can
change the programme to the desired cycle setting (see the section entitled „Starting a wash cycle. . . „ ). Then,
close the door.
NOTE: If you open the door when washing, the machine pauses and warning alarm rings, the display appears
E1. When you close the door, the machine will keep on working after 10 seconds.
The 6 programme lights show the state of the dishwasher:
a) All program lights off --> stand by
b) One of the program lights on --> cycle running
c) One of the program lights blinking --> pause
NOTE:
If all the lights begin to glimmer, that indicates the machine is out of order, please turn off the main power
and water supply before calling a service.
Forget to Add Dish
A forgotten dish can be added any time before the detergent cup opens.
1. Open the door a little to stop the washing.
2. After the spray arms stop working, you can open the door completely.
3. Add forgotten dishes.
4. Close the door, the dishwasher will work after ten seconds.
WARNING!
It is dangerous to open the door when washing, because the hot water may scald you.
Switch Off the Dishwasher.
The digital display appears „---“ and the buzzer rings 6 times, only in this case the programme has ended.
1. Switch off the dishwasher by pressing the ON/OFF button.
2. Turn off the water tap!