12.1.
17
Mixers - replaceable RA models
1. Notes for the user
5
1 . 6
Standards
The following directives are adhered to:
• 2006/42/EG (Machinery Directive)
• 2006/95/EG (Low Voltage Directive)
• 2004/108/EG (Electromagnetic compatibility)
Harmonised standards applied:
• DIN EN 60034-1; VDE 0530-1:2011-02:2011-02
(Rotating electrical machines - Part 1: Rating and performance)
• DIN EN 60204-1; VDE 0113-1:2011-01:2011-01
(Safety of machinery - Electrical equipment of machines - Part 1: General requirements)
• DIN EN 60034-9, VDE 0530-9:2008-01:2008-01
(Rotating electrical machines - Part 9: Noise limits)
• EN ISO 12100:2011-03
(Safety of machinery - General principles for design - Risk assessment and risk mitigation)
• DIN EN ISO 13857
(Safety of machinery - Safety distances to prevent danger zones being reached by the upper and lower limbs)
• DIN EN 614-1:2009-06
(Safety of machinery - Ergonomic design principles - Part 1: Concepts and general principles)
• DIN EN 1037:2008-11
(Safety of machinery - Prevention of unexpected start-up)
• DIN EN 60204-1; VDE 0113-1:2011-01:2011-01
(Safety of machinery - Electrical equipment of machines - Part 1: General requirements)
• DIN EN 61000-4-2; VDE 0847-4-2:2009-12:2009-12
(Electromagnetic compatibility (EMC) - Part 4-2: Test and measurement methods -
Testing the immunity to the discharge of static electricity)
• 3 GSGV / 9 GSGV
(German Equipment Safety Act Machinery Ordinance)
1 . 7
Danger symbols
Safety instructions and warnings serve to avoid danger to the lives and health of users or mainte-
nance personnel and damage to property. Attention is drawn to them by means of the symbols
defined here. The hazards are also highlighted where they may arise by means of danger symbols
(pictograms). The meaning of the pictograms is as follows:
Symbol
Signal word
Meaning
DANGER
Indicates that death, serious injury and/or major
damage will occur if the corresponding safety
precautions are not observed and implemented.
WARNING
Indicates that death, serious injury and/or major
damage can occur if the corresponding safety
precautions are not observed and implemented.
CAUTION
Indicates that minor injury and/or damage can
occur if the corresponding safety precautions
are not observed and implemented.
ATTENTION
Indicates that which may result in damages of
the product itself or of adjacent vicinity occur if
the corresponding safety precautions are not
observed and implemented.
NOTICE
This refers to important information about the
product itself or its usage to which special atten-
tion is to be drawn.
Indicates that death, serious injury and/or major
damage can occur as a result of an electric
shock if the corresponding safety precautions
are not observed and implemented.
