12.1.
17
Mixers - replaceable RA models
9. Transport, Packaging and Disposal
19
9 .
T r a n s p o r t , P a c k a g i n g a n d D i s p o s a l
9 . 1
Transport and Packaging
Prior to transport, the mixers are carefully checked and packed. However, the possibility of damage
during transport cannot be excluded.
Unpacking:
Remove the protective caps (if present) and any remaining packaging.
Receiving inspection:
Check the received mixer against the delivery note to ensure that no parts are missing!
If damage is discovered:
Check the delivery for damage (visual inspection)!
In case of complaint:
If the delivery has been damaged in transit:
- Get in touch immediately with the last shipper!
- Keep the packaging (in case the shipper wishes to inspect it or for returning the goods).
Packaging for returning goods:
If possible, use the original packaging material.
- If queries arise in connection with packaging and transport safety please contact Guth Ven-
tiltechnik GmbH.
Storage in open air:
Storage in the open air is not permitted.
Storage in closed spaces:
Storage conditions:
- Temperature: 0°C bis 30 °C
- Humidity (air): < 60 %
9 . 2
Disposal
The mixer is made mainly of steel (with the exception of electrical components and seals). They are
to be disposed of according to locally valid environmental protection regulations.
Cleaning agents must be disposed of in accordance with local regulations and the manufacturers'
instructions on the safety data sheets.
