Guntermann & Drunck DVICenter DP64, Руководство по установке

Страница: 75 / 124

Central Module » Initial configuration of network settings
G&D DVICenter DP64 · 10
Initial configuration of network settings
Accessing the Config Panel web application and using the expanded network functions
requires you to configure the network settings of the matrix switch.
You can configure the network settings by using one of the new consoles.
Configuring network ports
A central module, which is integrated into the network, can only be addressed after
the network ports are configured.
How to configure the settings of a network port:
1. After the console is switched on, the matrix switch asks you to log in. Enter the
following data to the login box:
2. Press Enter to login and open the on-screen display.
3. Press F11 to call the Configuration menu.
4. Select the Network entry and press Enter .
5. Select the Settings entry and press Enter .
6. Enter the following data in the Interface A (interface Network A ) or Interface B (inter-
face Network B ) section:
IMPORTANT:
In the default settings, the Network A port is assigned to the IP address
192.168.0.1 .
Username:
Enter the preset username Admin.
Password: Enter the preset password 4658 .
Operational 
mode:
Press F8 to select the operating mode of the interface
Network A or Network B :

Off: switches off network interface.

Static: uses static settings.

DHCP: obtains the settings from a DHCP server.
IP address:
Enter the interface IP address.
This setting is auto obtained in the DHCP operating mode.