Guntermann & Drunck DVI-Vision-CAT series, Инструкция по установке и эксплуатации

Страница: 128 / 148

Configuration
51 · G&D DVI-Vision-CAT
Automatic closing of the OSD after inactivity
If desired, you can set the OSD to close automatically after a period of inactivity.
The period of inactivity can be defined by entering a value between 5 and 99 seconds.
How to change the period of inactivity after which the OSD closes:
NOTE: To disable the function, enter the value
0
.
OSD
1. Press
Ctrl+Num
(default) to open the on-screen display.
2. Select the row
Console setup
and press
Enter
.
3. Select the row
Personal Profile
and press
Enter
.
4. Select the row
Close OSD when inactive for [s]
and press
Enter
.
5. Enter the desired time range from
5
to
99
seconds and press
Enter
.
6. Press
F2
to save your settings.
Conf
ig
Pan
el
1. In the menu, click on Users .
2. Click on the user account you want to configure and then click
on Configuration .
3. Click on the tab KVM extender systems .
4. Under Timeout OSD session , enter a time span between 5 and 99 seconds.
5. Click on Save .