Guntermann & Drunck ControlCenter-Digital-80, Руководство по установке

Страница: 52 / 64

Initial configuration of network settings
18 · G&D ControlCenter-Digital-80
6. Enter the following data under Interface A (interface Network A ) or Interface B (inter-
face
Network B
):
7. Press F2 to save your settings.
Configuring «global» network settings
In complex networks, global network settings ensure that the matrix switch is avail-
able from all sub networks.
How to configure global network settings:
1. Press
Ctrl+Num
(default) to open the on-screen display of the KVM matrix system.
2. Press
F11
to call the
Configuration
menu.
3. Select
Network
and press
Enter
.
4. Select
Interfaces
and press
Enter
.
Operational
mode:
Press F8 to select the operating mode of the interface
Network A or Network B :
 Off:
switches off network interface.

Static: uses static settings.
 DHCP:
obtains the settings from a DHCP server.
IP address: Enter the interface IP address.
This setting is auto obtained in the DHCP operating mode.
Netmask: Enter the network netmask.
This setting is auto obtained in the DHCP operating mode.
Connection type: Press F8 to define if the network port and its communication
partner are to negotiate the connection type automatically
( Auto ) or select one of the listed types.