Gunnebo RotaSec B120D, Инструкция по установке, эксплуатации и обслуживанию

Страница: 93 / 100

93
.............................
CCEC/ OM Manuals RotaSec Titan 1.5 08.2009
Table 8.2
– Factory Set Parameter Values
Firmware Version
- FBCBQMYR110
Location Def. 00 Def 01 Def.02 Variable Note Description
00
00 00 00 Pmagneti See Table 1 Magnets polarity BMT/SMT
01 03 03 03 MA
1 = locked
2 = unlocked
3 = reader
4 = temporised
Mode A at start-up
02 03 03 03 MD
1 = locked
2 = unlocked
3 = reader
4 = temporised
Mode B at start-up
03 01 01 01 EnableAll See Table 2 Alarms enabling at start-up (high)
04 00 00 02 EnableAll=1 See Table 2 Alarms enabling at start-up (low)
05 00 00 00 Pconteggio
0 = half rotation
1 = end rotation
Count pulse generation
06 19 19 19 PpulseCont 1/100 sec. Count pulse width
07 01 01 01 PinContA Count pulse per passage direction A
08 01 01 01 PinContB Count pulse per passage direction B
09 00 00 00 Psemafori See Table 3
Traffic light colours in reader or timed
mode.
0A 00 00 00 PsetLettori See Table 4 Reader mode settings
0B 00 00 00 PmaxPrenotaz
Range from 00H
to 0FH
Possible reader credit memory (max
15 credits
0C 50 50 50 PTOLett 1/10 sec. Max.passing time
0D 32 32 32 PTOTemporizzato 1/10sec Timer mode timeout
0E 0F OF OF PTOSbblocco 1/10sec Unlockdurationif turnstile not engaged
OE OF OF OF Riservato Reserved, do not modify
OF 14 14 14 PTOFineRot 1/100sec
Magnet block time after a normal
passage in unlock e single passage
mode
10 14 14 14 PTODisinverso 1/10sec Opposite direction blocking time
11 64 64 64 PTOPosiz 1/10sec
Position sensing timeout for arm out
of stand-by position
12 32 32 32 PpercSort Da S a S64 Choosing %
13 14 14 14 PTOBuzzerSort 1/10sec. Buzzer duration when chosen
14 14 14 14 PTOBoccoSort 1/10sec
Duration of turnstile stop during
choosing. Must be >=
PTOBuzzerSort
15 11 11 11 PtipoSort See Table 5 Choosing style alarm
16 05 05 05 PTOResAll Sec. Alarm duration before normalizing
17 00 00 01 PautoRelease
0=Disabilitato
1=Adilitato
Auto-reset in case of dead zone alarm
18 F6 F6 F6 PtempLow In C Lower temperature alarm threshold
19 28 28 28 PtempHigh In C Upper temperature alarm threshold
1A 00 00 00 K1High See table 6 Relay function assignment to K1
1B 01 01 01 K1Low See table 6 Relay function assignment to K1
1C 00 00 00 K2High See table 6 Relay function assignment to K2
1D 02 02 02 K2Low See table 6 Relay function assignment to K2
1E 00 00 00 K3High See table 6 Relay function assignment to K3
1F 04 04 04 K3Low See table 6 Relay function assignment to K3
20 00 00 00 K4High See table 6 Relay function assignment to K4
21 08 08 08 K4Low See table 6 Relay function assignment K4