GULLCO Pipe Kat PK-500-LG Series, Руководство по эксплуатации

Страница: 50 / 54

46
OPTIONAL EQUIPMENT
COOLANT FLOW SWITCH KIT: With the integration of this coolant flow switch, the PIPE KAT
®
system will only permit welding when the flow switch detects suitable coolant flow through the
torch, preventing welding problems and torch damage due to overheating, P/N PK-200-174.
WATER COOLER POWER INTERFACE KIT: This interface allows the PIPE KAT
®
control to
automatically activate/de-activate the water cooler during welding cycles, reducing the onus of
the operator to remember to switch the cooler on before each weld and also saving energy by
automatically turning the cooler off when not welding. Manual override toggle switch also
included. P/N PK-200-216-B for 115V coolers or P/N PK-200-216-C for 230V coolers.
PENDANT EXTENSION CABLE: Extension Assembly provides an additional 15ft of length to
the Remote Pendant P/N PK-200-368. The maximum combined total length of Remote Pendant
cable and Extension cable must not exceed 50ft. Distances over 50ft will result in
communication signal loss between the Main Control and Remote Pendant causing erratic
operation of the PIPE KAT
®
system.