2
1
5
7
9
11
10
12
14
15
16
13
8
6
4
17
3
3
Operators check list before use
• Make sure the lifter is moving freely on its castors.
• Operate the brakes (10) to make sure they are
working.
• Lift & lower the lifting boom (2) via the control
buttons (15) on the hand control (8).
• Check that the base adjustment (16) is opening
and closing, via the hand control (8).
• Check the emergency function up/down by press-
ing the buttons (17) on the control box (3). Check
the manual function by turning the knob (7) in the
direction of the arrow.
• Check that the emergency stop button (6) is
working. To release the emergency stop, take off
battery by pushing buttons on battery sides, and
pull battery out and push in place again.
• Make sure the hanger bar is free to rotate and
swing (1), and check that the hanger bar is firmly
attached to the boom (2).
Charging options
• Charger integrated in control box - plug net cable
into power socket.
• When the power is plugged in, the green LED
light on the control box lights up.
• The green and yellow diode on the control box (3)
illuminates during charging, when fully charged
the yellow diode turns off.
Quick Guide - GL5.2 Mobile Lifter
1. Hanger
2. Lifting boom
3. Control box
4. Battery
5. Push handle
6. Emergency stop
7. Emergency lowering
manual (option)
8. Hand control
9. Lifting actuator
10. Brake/release
11. Chassis leg
12. Battery indicator
13. Service indicator
14. Overload indicator
15. Lifting boom up/down
16. Base adjustment
17. Emergency function:
up/down, battery-,
service- and overload
indicator
