Guldmann 560602, Руководство пользователя

Страница: 19 / 28

19
8.00 Settings for the digital scale step-by-step
Example: Setting with AUTO-OFF (auto-shut-off) after 180 seconds and with
disconnected auditory signal.
Step 1. Press HOLD for 3 seconds in order to go to the settings status
SETUP.
Step 2. Press ZERO in order to go to the status A.OFF, when A.OFF is
shown.
Step 3. Press HOLD in order to select 180 S = time for automatic shut-off
is 180 sec.
Step 4. Press ZERO in order to select and go back to the A.OFF status,
and press HOLD in order to switch to the setting status BEEP.
Step 5. Press ZERO in order to go to the setting status BEEP, and press
HOLD again in order to choose between ON and OFF.
Step 6. Press ZERO in order to select and go back to the setting status
BEEP.
Step 7. Press HOLD in order to select END, and press ZERO in order to
end selecting the settings.
9.00 Replacement of battery
The model RS digital scale uses 6 AAA alkaline batteries. Read the instruc -
tions below before you use the digital scale.
1. The cover for the battery case is
located on the back side
2. Remove the battery case cover
on the digital scale.
3. Take the battery holder out.
©
Guldmann
G
B
-06/2021 • # 560642_101
©
Guldmann
G
B
-06/2021 • # 560642_101