WIRING DIAGRAM
STATUS LED
D3 is a common anode bi-color LED. The diagram at right shows
the pin-out, schematic symbol and pad connection for a common
anode LED. The pin-out for the bi-color LED is typically (but not
always) as follows:
1st Color Cathode
Is on the “flat” side of the
LED (see graphic); 90
degree bend in the lead
Common Anode
Middle lead
2nd Color Cathode
45 degree bend in the lead
The lead 1 pad on the circuit board is marked with a white box.
When connected correctly, the LED will light red when power is applied and the circuit is in bypass mode. The LED will
light green when in effects mode. If you wish to use a standard LED, connect the anode to the middle pad and the
