Easy Order Switching Board - 4PDT Version with Foot Switch & LED
This is a small order switching circuit that allows you to change the order of two external circuits or
internal circuits. Switching is achieved via a 3PDT On-On solder lug toggle switch.
●
Switch the order of the overdrive circuits and use in tandem!
●
Set the Boost to follow the Overdrive or cascade into it.
●
With a Boost following an Overdrive you get an increase in Volume.
●
With a Boost preceding the Overdrive you get an increase in Distortion
Starting to see the potential? Make your build stand out in the crowd and make it boutique.
Board Dimensions (W x H) 1.43” x 1.13” ca. 36.2 mm x 28.6mm
R1
1k8 to 4k - CLR
D1
CA Bi-colour LED*
DA
LED *
DB
LED *
SW1
4PDT Footswitch
*Either D1 or a combination of DA / DB is used for status switching. See our SHOP for 4PDT Footswitch.
