2/6
10
Analog pedal set
11
Pedal connector
12
Pedal cable
13
Adapter connector
14
Power adapter
15
Console connector (GAMEPORT)
16
USB connector
17
Table clamp
18
Clamp screw
INSTALLING THE WHEEL
Fixing the wheel in place
1.
Place the wheel on a table or other flat surface.
2.
Place the clamp screw
(18)
in the table clamp
(17)
and then screw the clamping unit into the hole on
the underside of the wheel until firmly fixed in place. Do not turn the screw too tightly, as you risk
damaging the clamping unit and/or the table.
Preparing the wheel
1.
Connect the pedal cable
(12)
to the pedal connector
(11)
.
2.
Connect the adapter connector
(13)
to the power adapter
(14)
and plug the adapter into an electrical
outlet.
Connecting the wheel
A - To play a standard racing game with your Enzo wheel recognized as a wheel:
1.
Switch off your console before connecting the wheel.
2.
Connect the GAMEPORT console connector
(15)
to port 1 of your console and connect the USB
connector
(16)
to the upper USB port.
3.
Set the
USB / USB + GAMEPORT
switch
(9)
to the position corresponding to the type of game you will
be playing. (Please refer to the
Settings
chart provided in the appendix.)
