GUILCOR AR003825, Руководство пользователя, Страница: 25 / 36

25
SOAP
The device allows you to send currently measured values via SOAP v1.1 protocol. The device
sends values in XML format to the web server. The advantage of this protocol is that
communication is initialized by the device side. Due to it is not necessary use port forwarding.
If the SOAP message cannot be delivered, warning message via SNMP Trap or Syslog
protocol is sent. The file with the XSD schema can be downloaded from:
http://
www.guilcor.com
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<soap:Body>
<InsertP8xxxSample xmlns="http://
www.guilcor.com
<name> Ethernet Transducer </name>
<sn> 11940986 </sn>
<tmr> 60 </tmr>
<kind> 4353 </kind>
<c1>
<v> 26.3 </v>
<u> C </u>
<a> no </a>
<e> 1 </e>
</c1>
...
...
...
<c5>
<v> -11000 </v>
<u> n/a </u>
<a> no </a>
<e> 0 </e>
</c5>
</InsertP8xxxSample>
</soap:Body>
</soap:Envelope>
Element Description
<name> Device description.
<sn> Contains the device serial number (an eight digit number).
<tmr> SOAP sending interval [sec].
<kind> Device type identification number (code):
Device
Device
AR004617
4352
AR005351
4353
AR003825
4354
<v> Actual measured value (a decimal part of number is separated by a dot).
Error on channel is signaled by number -11000 or lower.
<u> Channel unit. In case of error n/a text is shown.
<a> Alarm state, where no – no alarm, hi – high alarm, lo – low alarm.
<e> Information about enabled/disabled channel (1 – enabled/0 – disabled)