GUIDANCE MARINE RadaScan View, Руководство по установке

Страница: 6 / 69

Welcome to the RadaScan (Dashboard) Installer’s Guide. It explains how to mount and
install the RadaScan system onto a vessel. For instructions on how to use the system,
please see the RadaScan (Dashboard) Operator’s Guide (Doc No. 94-0393-4).
Please read the
Important Safety Notes on page 8 before beginning the installation.
The
Installing the Sensor Hardware and Software
section on page 11 describes
where to mount the RadaScan sensor on the vessel, and how to connect it to the
RadaScan Type 2 Marine Processor and the vessel’s DP system. It also explains how
to upgrade the sensor software, if required.
The
Installing the Type 2 Marine Processor section on page 29 gives relevant
information for mounting and setting up the Marine Processor and explains how to
upgrade the RadaScan Dashboard software, if required.
The
Configuring the RadaScan Dashboard section on page 35 explains how to
configure the system for your vessel.
The
Installing Responders
section on page 48 explains how to mount and use
RadaScan Responders.
Welcome
!
NOTE: Installation of a RadaScan
system should be carried out by a
suitably qualified and competent
engineer.
6