Charging Responders
54
The rechargeable responder should be fully charged before use.
A full charge takes approximately 24 hours.
!
DO NOT charge responders in an explosive
atmosphere or other hazardous environment.
The responder should be switched off while charging.
To Charge the Responder:
!
Note: Only use the supplied charger. Only charge at ambient temperatures of 0°C to
+45°C.
1. Switch the responder off and unscrew the charging socket cap on the rear of the unit.
2. Connect the supplied mains charger (Part No. 39-0049-2).
(Input:
100–240VAC, 50–60Hz, 1.5A
Output:
24VDC, 2.5A, 60W
).
3. When charging is complete, disconnect the power from
the unit and replace the charging socket cap.
Rechargeable Responder—Rear
Charging
Socket
Содержание RadaScan View
Страница 69: ......
