GUIDANCE MARINE RadaScan View, Руководство по установке

Страница: 34 / 69

Changing the Sensor IP Address Setting
During installation of the RadaScan Dashboard, its record of the sensor’s IP address is preserved,
so there is no need to reconfigure it. However, if the IP address should need to be amended for
other reasons, proceed as follows.
The Sensor’s IP Address is displayed on the
Sensor Information Display (see page 26).
To set the Dashboard’s record of the Sensor’s IP Address
The configuration settings for the Dashboard are stored in the ‘config.ini’ file, located in the
installation directory for the RadaScan Dashboard application. The default location is:
C:\Program Files\Guidance Navigation Ltd\RadaScan\RadaScan Dashboard\config.ini
Note that on a Windows 64-bit computer, the default location is:
C:\Program Files (x86)\Guidance Marine Ltd\RadaScan\RadaScan Dashboard\config.ini
1. Ensure that the Dashboard is not running.
2. Open the
config.ini file.
3. Locate this line:
SensorIP= <current IP Address>
4. Change the IP Address as required.
5. Save and close the file.
IMPORTANT: Do not edit other settings unless directed to do so by Guidance Marine or a
qualified technician. Indiscriminate adjustment of parameter settings can adversely affect
the operation of the RadaScan system.
The Comms Settings Pane
The Dashboard’s record of the Sensor’s IP Address can be viewed (but not changed) as follows:
1. Click on
More >> Page 2 .
2. Click on the Comms Settings button.
page 34
34
Network IP
Address