GUIDANCE MARINE RadaScan View, Руководство по установке

Страница: 33 / 69

Installing the Dashboard Software onto a Hatteland Panel PC
This section explains how to install the RadaScan Dashboard software onto a Hatteland Panel PC. If this
PC has been supplied by Guidance Marine, it will have been shipped with the RadaScan Dashboard already
installed. However, it may be necessary to upgrade the Dashboard software with a newer version. If so, first
uninstall the existing Dashboard.
To Uninstall the RadaScan Dashboard:
1. Click on Start > All Programs > Accessories > System Tools > Control Panel .
The Control Panel screen is displayed.
2. Click on the Programs and Features .
3. In the list of installed programs, right click on RadaScan Dashboard (on a touchscreen monitor, touch
and hold).
4. Click on the Uninstall option in the context menu.
5. Click on the Uninstall button on the RadaScan Dashboard Setup window.
6. Click on the Close button.
To Install the RadaScan Dashboard:
1. Copy the RadaScanDashboardSetup.exe file from the USB memory stick on which it was supplied
onto the Panel PC’s hard disk.
2. Double-click on the RadaScanDashboardSetup.exe file.
The Welcome screen is displayed.
3. Click on the Install button.
The RadaScan Dashboard Setup screen is displayed.
4. Select
RadaScan
as the Sensor Type and if required, change any of the settings from the default values
shown.
5. Click on the OK button.
When the installation has finished, the Setup Successful screen is displayed.
6. Click on the Close button.
Welcome Screen
RadaScan Dashboard Setup Screen
Setup Successful Screen
33