GUIDANCE MARINE RadaScan View, Руководство по установке

Страница: 32 / 69

Installing the Dashboard Software onto a Type 2 Marine Processor
This section explains how to install the RadaScan Dashboard software onto a Type 2 Marine Processor. If
this Marine Processor has been supplied by Guidance Marine, it will have been shipped with the RadaScan
Dashboard already installed. However, it may be necessary to upgrade the Dashboard software with a
newer version. If so, first uninstall the existing Dashboard.
To Uninstall the RadaScan Dashboard:
1. Click on Start > All Programs > Accessories > System Tools > Control Panel .
The Control Panel screen is displayed.
2. Click on Programs and Features .
3. In the list of installed programs, right click on RadaScan Dashboard (on a touchscreen monitor, touch
and hold).
4. Click on the Uninstall option in the context menu.
5. Click on the Uninstall button on the RadaScan Dashboard Setup window.
6. When prompted, click on the Restart button.
After the restart, the RadaScan Dashboard Setup window reappears.
7. When prompted, click on the Restart button.
The uninstallation process is complete following the restart.
To Install the RadaScan Dashboard:
1. Copy the RadaScanDashboardSetup.exe file from the USB memory stick on which it was supplied
onto the Marine Processor’s hard disk.
2. Double-click on the RadaScanDashboardSetup.exe file.
The Welcome screen is displayed.
3. Click on the Install button.
4. When prompted, click on the Restart button.
After the restart, the RadaScan Dashboard Setup screen is displayed.
5. Select RadaScan as the Sensor Type and if required, change any of the settings from the default values
shown.
6. Click on the OK button.
7. When prompted, click on the
Restart
button.
The installation process is complete following the restart.
Welcome Screen
RadaScan Dashboard Setup Screen
Setup Successful Screen
32