GUDEL FlexxPump4 B, Руководство по эксплуатации

Страница: 50 / 157

If the function is executed while the FlexxPump is in emptying time mode,
the set emptying time is shortened.
2 x
FIL
40 x
On
FIL 01 01
2 x
CLr CLr
Fig. 5-9 Execute FIL menu
Execute the FIL menu as follows:
Prerequisite: There is no malfunction at the FlexxPump
1 Touch the active surface with the magnetic peg
Ü 2
37
2 Remove the magnetic peg from the active surface once the LCD displays
"FIL" and the yellow LED lights up
3 Wait until the green LED and the LCD flash twice
The FlexxPump executes the FIL menu (40 pump strokes).
The counter-pressure values are displayed in bar on the LCD and the green
LED lights up during the individual strokes.
5.5.2.1 Cancel FIL menu
Cancel the FIL menu as follows if needed:
1 Touch the active surface with the magnetic peg
Ü 2
37
2 Remove the magnetic peg from the active surface once a dispensing
process is completed and the LCD displays "CLr"
3 Wait until the green LED and the LCD flash twice
The FlexxPump cancels the FIL menu.
Commissioning OPERATING MANUAL FlexxPump4 B lubrication system
3421295627_v1.0_
EN-US
50